carb-i-tool_countersink_drill_01

Carb-I-Tool Counter Sink Drill Bit

$55.00$60.00 inc GST each
Clear selection

Product Description

The Carb-I-Tool counter sink drill bit is the professional’s choice for pre-drilling and countersinking holes in timber.

Unlike the Clever Tool, the Carb-I-Tool countersink is carbide tipped for a long-lasting, consistent, countersunk hole.

The stop is made from nylon instead of using a rubber o-ring so there is less chance of the timber being marked.

The stop is mounted on a bearing and spins freely to eliminate scoring and burning of the timber.

The depth setting is easily adjusted with the hex key provided.

Replacement High-Speed Steel (HSS) drill bits are also available.

No Video Content

Additional Information

Weight .086 kg
Dimensions 160 x 92 x 40 mm
Drill Size

3.2mm (8 gauge), 3.8mm (10 gauge), 5.0mm (14 gauge)

Similar Products

  • Carb-I-Tool Replacement Drill Bit

    $7.95$25.35 inc GST per pack
  • EZY-LIFTER Decking Board & Flooring Remover

    EZY-LIFTER Decking Board & Flooring Remover

    $198.00 each
  • DIY Deck Kit - Tray, Stain / Oil Applicator, Brush and Pole

    DIY Deck Kit – Tray, Stain / Oil Applicator, Brush and Pole

    $35.00 each

Featured Products

  • Macsim Clever Tool Pre-Drilling & Counter sinking tool for Decking

    Macsim Clever Tool Pre-Drilling & Counter sinking tool for Decking

    $27.50$31.50 each
  • Macsim Clever Tool Replacement Bits

    Macsim Clever Tool Replacement Bits

    $21.95$29.50 each
  • Carb-I-Tool Replacement Drill Bit

    $7.95$25.35 inc GST per pack