Deck Protect® WPC Refresh is a solvent based UV resistant stain designed for internal and external composite wood surfaces to produce a rich natural light fast transparent look. Product will rejuvenate aged, colour reduced, stained, or marked composite wood. WPC Refresh is designed to be applied by rag, lambs wool applicator, brush or spray applied delivering rich uniform natural looking colours, whilst being fade resisting when exposed to direct sunlight. WPC Refresh is designed to be over coated with a minimum of 2 coats of Deck Protect® WPC Sealer Gloss or Matt prior to walking on the decking.
FOR USE ON – Composite decking, hand rails, walkways, ramps, steps, screening, gates, furniture. In fact any composite structure new or seasoned, coated or uncoated.
COLOURS– Black Bean, Jarrah, Silver Gum, Sahara.
APPLICATION – Rag, lambs wool applicator, brush or spray applied.
No. OF COATS – 1
DRY TIME – 2 – 4 hours depending on application process and may take up to 12 hours with excessive film build and lower temperatures.
TOPCOAT– WPC Clear Sealer must be applied after sufficient dry time has been allowed. Do not apply the Sealer if the WPC Refresh is wet.
SPREAD RATE Up to 25m² per Litre depending on the application process.
CONTAINER SIZE – 1 Litre, 2 Litre, 4 Litre
CLEAN UP – Mineral Turpentine
Blackbean, Jarrah, Sahara, Silver Gum
2 Litre, 4 Litre