Product Description

Brackets for Qwickbuild by Outdure

Qwickbuild Brackets

90 degree corners for connecting joist corners and bearers to joists when the joists are hung at the same level as the bearer.

Suits 45×45, 90×45, 135×45 and 180×45 profiles. (See video tab for more info).
Smaller 28×45 version also available.

Double Joist bracket for doubling the width of the joist for 200mm only to allow decking fixings to not be too close to the end of the board.

Suits 45×45, 90×45, 135×45 and 180×45 profiles. (See video tab for more info).

Joist anchor for securing the joist to the top of the bearer.

Suits 45×45, 90×45, 135×45 and 180×45 profiles. (See video tab for more info).

Brace Cleat Flush bracket for joining two profiles together end to end. If joining two joists, make sure that the join is always on a bearer and that a Brace Cleat Flush is used on one side and a Joist Anchor on the other.

Suits 45×45, 90×45, 135×45 and 180×45 profiles. (See video tab for more info).

Fascia / Trim Bracket creates a fixing point for decking fascia.

Suits 45×45 and 90×45 profiles. (See video tab for more info).

Click on the install guide below for more information and don’t forget to check out the video tab

Additional Information

Weight	.5 kg
Dimensions	200 x 200 x 100 mm
Bracket	90deg (28×45), 90deg (45mm+), Brace Cleat Flush (45mm+), Double Joist (45mm+), Joist Anchor (45mm+), Trim/Fascia (45×45), Trim/Fascia (90×45)