Product Description

Stainless 316 Rigging Screws, Turnbuckles, Lag Screws & Fork Terminals for Balustrading

316 Rigging Screw Jaw/Jaw M5 x 130mm

Suits the more flexible 7×7 Wire Rope Cable.

Other hardware required

• Thimble
• Swage
• Saddle

or

• Screw Eye

316 Rigging Screw Jaw/Swage M5 x 3.2mm

Suits the more rigid 1×19 Wire Rope Cable.

Other hardware required

• Fork Terminal
• Saddle

or

• Screw Eye

or

• Lag screw

316 Terminal Swage Fork 3.2mm x 65mm

Can be used at the other end of the cable when only 1 turnbuckle per run is required for tension.

Other hardware required

• Turnbuckle

316 Terminal Swage Lag Screw LH 3.2mm

For use with the 1×19 Wire Rope Cable.

Can be used instead of a Fork Terminal and Screweye into timber for a more streamlined look.

A left hand and right hand Lag screw can be used to achieve a short run without required a turnbuckle for tension.

316 Terminal Swage Lag Screw RH 3.2mm

For use with the 1×19 Wire Rope Cable.

Can be used instead of a Fork Terminal and Screweye into timber for a more streamlined look.

A left hand and right hand Lag screw can be used to achieve a short run without required a turnbuckle for tension.

Rigging Screw Spanner

Make sure you grab one of these as well.

A handy little tool for tensioning your turnbuckles.

Alternatively a small screw driver can be used, but this spanner is much easier.

Additional Information