Full Thread Hex Bolt Galvanised 10mm suits Klevaklip Joist Support
$1.50 – $2.85 each
Openpay is available on orders from $50 - $10,000.
Buy in bulk and save!
50 = 10% off
100 = 15% off
150 = 20% off
200 = 25% off
250 = 30% off
50 = 10% off
100 = 15% off
150 = 20% off
200 = 25% off
250 = 30% off
Product Description
Hex Bolt and Nuts can be used in a wide variety of building and industrial applications where joining of materials is required.
At Demak we only supply our M10 Gal Hex bolts with a full thread so they can be used with the Klevaklip Adjustable Joist Support. If you forgot to order them with your joist support brackets then you’ve come to the right place!
Remember, you will need 2 bolts, 2 washers and 4 nuts for every 1 bracket.
See this handy chart below to work out the bolt length you need to suit your job.
What Length Bolts do I need?
| Hex Bolt Length | Min Height to bottom of Joist |
Max Height to bottom of Joist |
Min Height to top of 90mm Joist |
Max Height to top of 90mm Joist |
| 75mm | 10mm | 40mm | 100mm | 130mm |
| 100mm | 10mm | 60mm | 100mm | 150mm |
| 120mm | 10mm | 80mm | 112mm | 170mm |
| 150mm | 10mm | 110mm | 142mm | 200mm |
Please Note: These measurements only apply when using our “full length thread” bolts.
No Video Content
Additional Information
| Weight | 0.1 kg |
|---|---|
| Dimensions | 100 x 100 x 100 mm |
| Nuts Required | 1 x Nut & 1 x Washer per bolt, 2 x Nuts & 1 x Washer per bolt |
