Description

Give your Backyard that “Wow Factor”

The Floating Bench Bracket

The Hoppo Seat Bracket can be mounted to either timber or masonry and will create a beautiful floating seat.

Made from Heavy Duty 100mm x 10mm thick Black Steel Plate.

The bracket is 170mm wide across the wall, and 350mm deep.

Holes are laser-cut at 15mm.

The plate is offset to allow the bracket to be used as an end bracket aswell. (i.e The “L” bracket is no longer required)

How many do I need?

Spacing for these brackets depends on the material being used for the seat. If you are using a 19mm Decking board, then you will need a bracket spaced at every 450mm. (Wider than this and the decking may sag.)

90×45 offcuts are the best thing to fix to the side of each bracket to fix your cladding.

These brackets are available in 2 finishes, Raw steel and hot dip galvanized.

Thanks to @hopkinsconstruction for the original idea for the bracket as well as providing the inspiration for the deeply thought out name for it too.

Heavy Duty Seat Brackets